Your
Scent Smoker ® comes with two pieces:
The
main smoker and a small table insert.
Read
directions carefully.
-
Extend
the legs on the smoker table and insert into the smoker. The table must
be in position to elevate the burning material above the bottom port. The legs will be flat when
shipped to you so be sure to bend the legs out prior to use
-
Add
one handful of Scent Smoker hardwood chips to the smoker and ignite.
-
Hint: It
is easiest to use a small propane torch to light the chips
-
Operate
the bellows vigorously to insure the ignition of the hard wood
chips.
-
Once
the initial chips ignite sufficiently, add one additional handful of
hard wood chips to the smoker. This will cause the chips to smolder and
produce heavy smoke. Work the bellows only enough to keep the chips
smoldering and smoke exiting the smoker. Overuse of the bellows will
cause the smoldering chips to re-ignite and a dramatic reduction in
smoke production. Over-use of bellows may cause flames to exit the
smoker. Use caution, avoid over-use of bellows.
-
Coat
EVERYTHING with smoke. (clothes,boots,packs,stands,blinds, weapon, etc,)
-
Extinguish
the burning matter completely.
One
thing to note is that when you use the Scent
Smoker®, that some deer may actually "investigate" the
smell, so if you are moving in your stand you will get "busted".
Be sure to remain still while in you hunting!
WARNING:
Improper
use of the Scent Smoker may cause injury or death.
The
smoker gets HOT and will retain heat for some time after being
extinguished, protect yourself and others from bodily and or property
damage.
Use
the smoker only in a safe, outdoor environment.
Keep
away from children.
Put out smoker with
water
Use
at own risk.
